To close the filter chamber
Replace
the gasket
Position
the
indentation in the cover
into the center of the
HEPA filter
Replace
the 4 screws
and tighten
Turn
the Airpura
back on casters
OPERATING
&
FILTER REPLACEMENT
DIRECTIONS
G600
DLX
Insert
the tube
into the filter
chamber inside
the Prefilter
Let
the spiral
open to fill
the opening
Open
the top of the
spiral to make a
slight funnel
Insert
the
Carbon canister into
the funnel and hold it
straight
Position
the
Prefilter inside
the filter
chamber
Place
a felt gasket at
the bottom of the
filter chamber
Unfold
the filter slider
(Supplied with replacement
filters or on request
Part#6F 001)
Roll it
into a spiral
Let
the canister
slide down
thefilter slider
Pull
the filter slider up
out of the cavity using
both hands and let the
canister slide to the
bottom of the cavity
Remove
the filter
slider and fold it
for further use
Slide
in the
Hepa filter
To open the filter chamber
Turn over
the Airpura
Remove
the 4
retaining screws
Take off
the cover
Remove
the gasket
