User & Installation manual
VHF- Communication Transceiver
Doc.-Nr:
DE-3000-800100e
KRT2
Revision 12.2
Jan. 2016
18 / 61
In the identifier window a
blinking cursor will show up
under the extreme left
character.
The turning knob selects
the desired character.
The AUD button positions
the curser one character to
the right. The DUAL button
positions the cursor one
character to the left and
simultaneously erases this
character.
The station identifier can consist of maximum 8 characters.
To change frequency just press the FREQ button and follow the normal
direct input procedure to edit the frequency.
To quite the frequency input press the MEMORY button again in order to
go to the station identifier window for editing the identifier if required.
Using the buttons FREQ and MEMORY it can be toggled any time
between identifier and frequency input.
Keep in mind the watch dog timer which will terminate the input mode
after 20 sec.
Termination / save
From the identifier mode pressing
key, for short time “SAVE” will
appear and the system will go back to the favourite selection.
A
sorting process
can be activated by pressing MEMORY again from
the EDIT-mode.
