Page 5 of 10
A. Yellow cable (BATT/B+)
The yellow cable should be connected to the fuse of the constant power
supply in the car fuse box. If you are looking for a constant power supply in
the fuse box: Use a voltage tester to check the fuse to ensure it still have
electricity even if the car engine is off.
B. Red cable (ACC)
Connect the red cable to a fuse that can supply power only when the car
engine starts. Testing method: the tester bulb will light when the engine is on
or no light when the engine is off.
C. Black cable (GND)
Connect this black cable(GND) to the metal part of the vehicle. Most cars
have screws or metal parts next to the fuse box. Connect the black cable to
the screw or metal part.(As in the picture below)
Operation and Voice Control Description
Button Description:
1. When your AirOne dash cam is on, press POWER to turn screen off, press POWER
again to turn screen on; When your AirOne dash cam is on, press and hold POWER for 3
seconds to turn off WIFI hotspot. When WIFI off, press and hold POWER for 3 seconds to
turn it on; When dash cam is on, press and hold POWER for 10 seconds to change all
back to factory setting.
Note
:
please release POWER button once reach certain time!
