MT7682 HDK V11 User's Guide
© 2017 Airoha Technology Corp.
Page 13 of 28
This document contains information that is proprietary to Airoha Technology Corp. (“Airoha”) and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
Figure 7. On-board LEDs
GPIO pins to activate the LEDs are shown in Table 3.
Table 3. GPIO pins to activate the LEDS
LED
GPIO
D1
GPIO11
D2
GPIO12
D3
GPIO13
D4
GPIO14
D5
GPIO15
4.4.
Buttons
The MT7682 HDK is equipped with buttons with the following functionality. The push buttons are shown in Figure
1)
System reset button (
S2001
) resets the MT7682 HDK.
2)
External interrupt button (
S2005
). Users can configure GPIO0 as an external interrupt pin. Press the
button to wake up the system from the sleep mode.
3)
RTC interrupt button (
S2006
). When the system is in RTC mode, push the button to wake up the system.
4)
CMSIS-DAP Firmware update button (
SW3001
). Press the button to enter upload mode and upload the
latest CMSIS-DAP Firmware to MK20.
