7
AIROCKS PRO ARX-900 USER GUIDE V1.0
allow the installer to manually configure operating parameters, as well as monitor several key functions
such as received signal level, and audio level and activity.
2.4
N
ETWORK
O
VERVIEW
An AiRocks Pro network can operate in one of two modes:
Managed
or
Unmanaged
.
2.4.1
Unmanaged Network
An unmanaged network is simply an AiRocks Pro network that does not use the Network Management
System. If the user wishes to merely deploy one or more Relay units in a small network, this can be done
by simply plugging the units in and turning on the power. The AiRocks Pro units function fully
automatically and autonomously. Front panel controls give the user full control of configuration
parameters and monitor functions.
2.4.2
Managed Network
A managed network is one that employs the AiRocks Pro Network Management System (NMS)
application. Use of the NMS is strictly optional, but highly recommended since it can give valuable
information for configuring the network for optimum performance in the presence of interference,
range, or obstruction limitations of the venue. The NMS gives a graphical view of everything that is
happening in the network and can help quickly diagnose problems that arise during an event.
Note: The ARX-900 USB interface uses a standard HID driver which is built into the PC’s operating
system. Therefore, no custom USB drivers need to be installed. When the ARX-900 is first attached to a
USB port, the operating system installs a HID driver for that port. This OS installation process can take
up to 30 seconds. Be patient while this process takes place. It will only occur when the ARX-900 is first
connected to the USB port.