SAFETY PRECAUTIONS
WARNING
As with all machinery, there are certain hazards involved with their
operation and use. Exercising respect and caution will considerably
lessen the risk of personal injury. However, if normal safety precautions
are overlooked, or ignored, personal injury to the operator, or damage
to property may result.
It is in your own interest to read and pay attention
to the following rules:
1.
COMPRESSED AIR IS DANGEROUS, NEVER direct a jet of air at people
or animals, and NEVER discharge compressed air against the skin.
2.
DO NOT operate your compressor with any guards removed.
3.
Electrical or mechanical repairs should only be carried out by a
qualified engineer. If problems occur, contact Machine Mart.
4.
Before carrying out any maintenance, ensure the pressure is expelled
from the air receiver, and the machine is disconnected from the mains.
5.
DO NOT leave pressure in the receiver overnight, or when transporting.
6.
DO NOT adjust, or tamper with the safety valves. The maximum pressure
is factory set, and clearly marked on the machine.
7.
DO NOT operate in wet or damp conditions. Keep the machine dry at
all times.
8.
A clean atmosphere will ensure efficient operation. Do not use in dusty
or otherwise dirty locations.
9.
Some of the metal parts can become quite hot during operation.
Take care not to touch these until the machine has cooled down.
10. Always adjust the pressure regulator to the recommended setting for
the particular spray gun or tool being used.
11. When spraying inflammable materials e.g. cellulose paint, ensure there
is adequate ventilation and keep clear of any possible source of
ignition.
12. Protect yourself. Think carefully about any potential hazards which
may be created by using the air compressor and use the appropriate
protection. e.g. Goggles will protect your eyes from flying particles.
Face masks will protect you against paint spray and/or fumes.
13. Before spraying any material always consult paint manufacturers
instructions for safety and usage.
- 4 -
SPECIFICATIONS
Electrical Supply ................................................. 230 V, 1 Phase 50Hz
Motor Rating ....................................................... 1.5 HP
Max. Air Pressure ................................................ 8 bar (115 lbf/in
2
)
Air Displacement ............................................... 7 cuft/min
Air Receiver ........................................................ 24 litre
Nett Weight ......................................................... 18kg
Dimensions .......................................................... 600x260x600mm
Duty Cycle .......................................................... S3 40% at 7bar**
Part No. ............................................................... 000116158
**
The machine may not be run for more than 4 minutes in any 10 minute period at 7bar
Please note that the details and specifications contained herein, are correct at the time of going to
print. However, Machine MART reserve the right to change specifications at any time without prior
notice. Always consult the machine’s data plate
- 13 -
Your Airmaster Tiger Oil Free Air Compressor can be used in conjunction with a range of
optional accessories for inflating tyres, air brushing, stapling, blowing and many other uses.
For details contact your local accessory stockist. 3 and 5 piece kits are available from your
Machine Mart which are ideal for almost all applications.
Please quote part number
000310000
- 3 piece Kit 300
000310010
- 5 Piece Kit 400
Should you experience any difficulties obtaining accessories, please contact the Machine
Mart - telephone 0115 955 9999 for details of your nearest branch.
ACCESSORIES
5 Piece, Kit 400
