Instruction, Operation, and Maintenance Manual
READ AND SAVE THESE INSTRUCTIONS
Inspection
On receipt inspection shipment for damage. Report any damage to freight carrier.
Before operating, inspect unit for any damage that may have occurred during
transit or unpacking. Check guards to see that they are securely fastened to the
housing at inlet and outlet. Inspect power cords for damage to the insulation.
TURN SWITCH TO THE OFF POSITION BEFORE CONNECTING OR
DISCONNECTING THE POWER SOURCE.
OPERATE UNIT ONLY ON VOLTAGE AND FREQUENCY FOR WHICH
IT IS DESIGNED. BE SURE TO CHECK PACKAGE LABEL AND / OR
NAMEPLATE TO VERIFY CORRECT VOLTAGE AND FREQUENCY.
MAKE SURE TO USE UNIT WITH A GROUNDED POWER RECEPTICAL.
DO NOT USE GROUND ADAPTERS.
DO NOT KINK COR OR LET IT COME INTO CONTACT WITH SHARP
EDGES OR CHEMICALS.
UNPLUG FAN TO MOVE OR SERVICE.
DO NOT USE WITH ANY EXTERNAL ELECTRONIC SPEED CONTROL
DEVICES – SPEED CONTROL IS BUILT WITHIN MOTOR.
DO NOT USE IN ANY FLAMMABLE, EXPLOSIVE, OR CHEMICALLY
LADEN ENVIRONMENT.
WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE TO WATER OR RAIN.
ECo IOM Manual Version 1.0
Page 1
