17
18
When joining the final two sections to form a circle, it helps to anchor your leg against the trampoline
LEG vertically below the connection. This will provide extra leverage, making it easier to line up and
slide the two joints together.
19
The completed frame should appear as shown above.
•
Note:
Some of the top rail connections will not be completely connected.
This is perfectly fine because once the springs are added this will pull the
frame securely together.
3
20
21
Lay out the JUMPING MAT on the ground inside the completed frame. Once done attach a spring to
any D-Ring located on the JUMPING MAT. You will notice that the SPRING has a different length hook
at each end. It is most important that shorter hook is attached to the JUMPING MAT D-Ring. Also
make sure that the D-Ring is neatly positioned with its long edge located inside the D-Ring fabric
sleeve as shown.
