3
The function selection knob controls fan speed or cooling speed.
"HIGH FAN" high speed wind flows out (compressor stopped)
"MID FAN" mid speed wind flows out (compressor stopped). (only 18000Btu/h)
"LOW FAN" low speed wind flows out (compressor stopped).
"HIGH COOL" the fastest cooling is achieved.
"MID COOL" the faster cooling is achieved. (only 18000Btu/h)
"LOW COOL" slow cooling is achieved.
"OFF" the conditioner stop.
THERMOSTAT
The temperature gets lower from 1 to 5 is for cooling
function.
The compressor operates continuously by setting the temperature dial
to nearly "TEST". Do not set this dial to the setting as it is for
testing purpose.
When the compressor stops by turning the temperature dial in cooling
operation, wait 3 minutes before turning it back to restart the
compressor. Immediate returning the dial may cause overload to the
machine, resulting in a blown fuse.
Slowly turn the knob from "LOW COOL" to "HIGH COOL" do not
turn it too often.
HOW TO EXHAUST ROOM AIR
Turn the lever "CLOSE" to exhaust a portion of the room air.
Turn the lever "OPEN" to close vent.
Usually this lever is kept at "CLOSE" position (left).
Turn the lever "CLOSE" to close ventilation in case of typhoon.
FUNCTION SELECTION
CAUTION
CAUTION
CAUTION
Summary of Contents for AAC90CW
Page 11: ...10 Fig 14 Fig 16 Fig 15 Fig 13...
