![Airmar G2183 Owner'S Manual & Installation Instructions Download Page 6](http://html1.mh-extra.com/html/airmar/g2183/g2183_owners-manual-and-installation-instructions_2878268006.webp)
6
Follow the safety precautions below to reduce the risk of poor product
performance, property damage, personal injury, and/or death.
WARNING
:
GPS Accuracy
The GPS position and velocity accuracies are controlled by the U.S. Department
of Defence. Therefore the position accuracy described in the specifications cannot
be guaranteed.
WARNING
:
Correct Installation Important
The sensor must be installed and operated according to the instructions in this
owner’s guide.
WARNING
:
Installation Safety
Always wear safety goggles and a dust mask when installing.
WARNING
:
Electrical Safety
The power supply must be OFF before making electrical connections.
WARNING
:
Voltage
The power supply voltage must be 9 - 40VDC.
WARNING
:
Battery
Make power connections to a power source that is isolated from the engine start
battery(s). Voltage drops may cause the sensor to lose information and/or change
operating mode.
WARNING
:
Fuse or Circuit Breaker
A safe installation requires a 0.5 amp fast-blow fuse or circuit breaker.
WARNING
Navigation Aid Only
: The sensor is only an aid to
navigation and should never be solely relied upon. It is
not a replacement for traditional navigation aids and
techniques. Only official government charts contain all
the information needed for safe navigation.