AirM2M_ESP8266 WiFi module user manual V3.2
Shanghai AirM2M Communication Technology Co., Ltd
http://www.airm2m.com
Page 64
.197.145",8000,"CONNECTED"
C:2,"TCP",”192.168.1.119”,36890,"192.168
.1.100",7777,"CONNECTED"
C:3,"","",,””,,"INITIAL"
3.3) Besides linking to Internet server, module also works as server to monitor local connection,
service including: multi- link and non- transparent transmission.
→
AT+CIPSERVER=1,3366
←
OK
←
0,CONNECT OK
accept a link , linkid is 0.
←
2,CONNECT OK
accept a link , linkid is 2.
→
AT+CIPSEND=0,8
←
>
After input 12345678, then data can send out
by itself.
←
0,SEND OK
→
AT+CIPSTATUS
Inquire TCPIP status
←
OK
STATE:IP STATUS
S:0,3366,LISTENING
C:0,UDP,”192.168.4.1”,3366,”192.168.4.10
0”,51733,CONNECTED
C:1,TCP,”192.168.1.119”,35669,”120.209.1
97.156”,8000,CONNECTED
C:2,TCP,”192.168.4.1”,3366,”192.168.4.100
”,57957,CONNECTED
C:3,"","",,””,,"INITIAL"
3.4
）
Besides linking to Internet server, module also works as server to monitor local connection ,
service including: multi- link and transparent transmission.
→
AT+CIPSERVER=1,3366
←
OK
→
AT+CIPMODE=1
←
OK
→
AT+CIPSCON=1
←
OK
Reboot module. It will enter transparent transmission mode automatically and set up
connection 1,"TCP","120.209.197.145",8000. Module works as SERVER at the same time to
monitor port 3366, waiting for setting up connection from client
