AIRLUX ARCAV54, Instruction Manual

Page: 29 / 52

48
This Dynamic Climate mode enables the relative
humidity inside the unit and the temperature to be
distributed evenly around the interior so you can
store all your wine under exactly the same excellent
conditions. If you would like to use the unit to store
wine long term, the dynamic climate mode is a must.
This will create a continuous climate in the cabinet
which imitates that of a wine cellar.
In the Dynamic Climate mode, the interior fan
circulates the inside air evenly
even when the set
temperature is r eached. Dynamic Climate mode is
NOT the factory preset mode because of creating
noises and more energy consumption. To chang e to
Dynamic Climate mode, touch and hold the
DOWN
key for approximatel y five seconds. The wine cellar
will beep five times to conf irm Dynamic Climate
mode is on. T o change back to default (Silent) mode
(Also known as energy saving mode) , touch and
hold the
UP key for approximately five seconds.
The wine c ellar will beep three times to confirm
default (Silent) mode is on.
In the event of a power interruption
(power surge,
breaker switch, etc.) , the unit remembers the
previous temperature settings. When the power is
recovered,
the cabinet temperature will go back the
same setting temperature as before the power
interruption.
If the door has been left open for more than 60
seconds, the alarm will sound.
Once the set temperature has been reached in the
appliance, the alarm stops and the relevant
temperature display stops flashing. However, if the
noise disturbs you, you can switch the alarm off
before this if you wish by pressing the
POWER key
once. The alarm will stop. The relevant temperature
display continues to flash until the set temperature
has been reached.
The display then lights up
constantly, and the alarm system is fully active
again.
The interior light makes it easy to view your wine
labels and enhances the display of your collection.
Touching the LIGHT mark toggles between 2 modes
of operation for the internal lights: functional(default)
mode and showcase mode. If you are in functional
(default) mode, the lights will turn on only when the
door is open. If you are in showcase mode,
the
lights will be on whether or not the door is open.
The unit is equipped with a LED light fitting system.
To change the LED light fitting pls contact the
service department.