3
User manual – Controller CP Touch
Controller description
:
The CP Touch controller can be connected to DUPLEX units fitted with an RD5 control
board. The CP Touch provides full control for these units, i.e. service parameter
settings (password protected) as well as user settings. It has a manual mode, allowing
the user to choose directly the operating mode of the unit, and a weekly mode
controlling the unit according to a weekly program. The software version is also
shown in the user setting of the controller (
6.8).
Note: The CP Touch controller’s commissioning and connection to a DUPLEX
units may only be done by a specialist company with up-to-date training certification
for DUPLEX units with RD5 controls.
1
Installation
First, mount the controller on the designated location on the wall.
It can be mounted on a standard electrical box with a hole spacing of 68mm.
The box can be clipped on from one
direction only
Cross-section of the wall with
the controller box
Step 1
: Before installation
dismantle the controller,
removing its front from its
back.
Step 2:
Place the back on the
designated spot on the wall and fix it
using screws.
Step 3:
Clip the front with display
onto the fixed back.
68mm
→●←
Press here