Authentication: Shows the authentication mode that access point or wireless device uses. If the wireless
access point does not require authentication, you’ll see ‘Unknown’ displayed here.
Network Type: Shows the type of wireless connection. If it’s a wireless access point, ‘Infrastructure’ will be
displayed here; if it’s a computer or network device, ‘Ad Hoc’ will be displayed here.
3. Click the wireless access point or network device you wish to connect, it will be highlighted, then click
‘Connect’.
If the access point you selected does not enable encryption (The content of ‘Encryption’ field of the
access point you selected is ‘None’, you’ll be connected to this wireless access point within one minute.
Please jump to step 6.
If the access point you selected enables encryption, please proceed to next step.
WN-5000 USB
User’s Manual
13
4. If the wireless access point does not have SSID, you’ll be prompted to input it here. Please ask the owner
of wireless access point and input the exact SSID here, then click ‘OK’ when ready. If the SSID you
provided here is wrong, you’ll not be able to connect to this access point.
If the wireless access point you selected have SSID, please skip this step.
