4
4
English
802.11 a/b/g Wireless AP
WLA-5200AP
Installation Steps
1.
Please install your network cards first before the AP
2.
Screw-in the antenna (clockwise) into the Antenna connector
3.
Connect the power and LAN cable to the back
4.
Use your wireless card to do a site survey, the default SSID is
airlive
5.
If you need to change AP’s configuration, please follow the procedure
below:
The Client mode’s default IP address is 192.168.1.254 Please
make sure your computer IP is in the same subnet as the AP (i.e.
192.168.1.x)
Open the web browser and enter 192.168.1.254
Enter the default user name airlive and password
“
airlive”
English
English
Wireless mode setting
This page includes all primary and major parameters for wireless mode
setting. Any parameter change will cause the device to reboot for the new
settings to take effect.
Wireless Modes:
AP, Client, Bridge, WDS Repeater, Universal
Repeater, WISP (Client Router),
and
WISP +
Universal Repeater
The default is set to AP mode. You can select to change it to other modes.
Network Type:
When in Client mode, you can select between
Ad-Hoc
and
Infrastructure
Repeater Type:
When in Repeater mode, you can select between
WDS Repeater
and
Universal Repeater
WISP Type:
When in WISP mode, you can setup
WISP(Client Router)
