
AirLive WL_5470AP User’s Manual
28
4.5 WDS Repeater Mode Setting
Alias Name
You can set the alias name for this device. limited not exceed 32 characters.
Disable Wireless
LAN Interface
Check the box to disable the Wireless LAN Interface, by so doing, you won’t be
able to make wireless connection with this Access Point in the network you are
located. In other words, this device will not be visible by any wireless station.
Band
You can choose one mode of the following you need.
~
2.4GHz
(B):
802.11b supported rate only.
~
2.4GHz
(G):
802.11g supported rate only.
~
2.4GHz
(B+G):
802.11b supported rate and 802.11g supported rate. The
default is 2.4GHz
(B+G)
mode.
SSID
The SSID differentiates one WLAN from another; therefore, all access points and
all devices attempting to connect to a specific WLAN must use the same SSID. It
is case-sensitive and must not exceed 32 characters. A device will not be
permitted to join the BSS unless it can provide the unique SSID. An SSID is also
referred to as a network name because essentially it is a name that identifies a
wireless network
Channel Number
The number of channels supported depends on the region of this Access Point. All
stations communicating with the Access Point must use the same channel.
Wireless Client
Isolation
When enabled, the wireless clients are separated from each other. Please refer
the AP mode settings
Æ
Wireless Client Isolation for details.
Security
Please refer the AP mode settings
Æ
Security for details,