AirLive WL-1200CAM
User’s Manual
19
The IP camera will display the image of the area that IP camera points to at the left. The motion
detection area must be rectangle, and cover the area you want to use motion detection function.
You can define a new motion detection region by mouse cursor:
1.
Click and hold left mouse button at the start point of rectangle on the image.
2.
Drag the mouse cursor, to define a rectangle.
3.
When you think the rectangle meets your needs, release left mouse button.
If you
’re not satisfied with the area that covered by the rectangle you just drawn, just repeat step 1 to 3
to establish a new rectangle. Then, click
‘Add Region’ to add a new region to your motion detection
region list.
The descriptions of every setting in this menu will be given below:
Item
Description
Region List
Lists all existing motion detection regions. You can define up to three
pre-defined region.
Region Name
When you define a new region by mouse cursor, a default region
name will appear here automatically (named by the size of the region
you defined). You can change the name to the one you want to use
by keyboard.
Sensitivity
Define the sensitivity of motion detection. When the sensitivity is
lower, the IP camera will take a picture only when a numerous
changes in the area are detected. If you want the IP camera to
record all tiny changes in the motion detection area you defined, use
a higher sensitivity setting.
Threshold
When the threshold is high, the IP camera will take a picture only
when a numerous motion is detected. If you want the IP camera to
record any motion in the motion detection area you defined, use a
lower threshold setting.
Add Region
When you defined a new region by mouse cursor, click this button to
add a new region to
‘Region List’, and use the name listed at ‘Region
Name
’ as new region’s name.
Get snapshot
If you moved the IP camera, or the objects that IP camera faces to is
moved, you can click this button to get a new snapshot of the area
that IP camera faces to, so you can decide how to
When you finish with setting up motion detection region, click
‘OK’ to start motion detection, or click
‘Cancel’ to discard all settings you just made, and motion detection function will not be activated.
