AirLive WIAS-1000G Manual Download Page 1

Page: 1 / 4

How to deploy console cable to connect WIAS-1000G and PC, to reset setting or check

status via console

WIAS-1000G provides function to reset password or default setting via console port, the following steps to guide you

the process.

WIAS-1000G console port is RJ-11, and there is a RJ-11 to RS-232 cable including in the packing.

This is the outlook of cable

Before to run Windows Hyper terminal program, you should connect WIAS-1000G and your PC with cable. Just plug

RJ-11 to WIAS-1000G console port, and RS-232 to your PC serial port, then to follow the steps to configure Hyper

Terminal and enter WIAS-1000G to access the command via console port.

Summary of Contents for WIAS-1000G

Page 1: ...process WIAS 1000G console port is RJ 11 and there is a RJ 11 to RS 232 cable including in the packing This is the outlook of cable Before to run Windows Hyper terminal program you should connect WIA...

Page 2: ...o make selection or confirm what you enter 3 Once the console port of WIAS 1000G is connected properly the console main screen will appear automatically If the screen does not appear in the terminal s...

Page 3: ...m is displayed Display system up time The system live time time for system being turn on is displayed Check service status Check and display the status of the system Set device into safe mode If admin...

Page 4: ...n to change the administrator s password Even if you forgot the password and are unable to log in the management interface from the web or the remote end of the SSH you can still use the null modem to...