Chapter 5: System Configuration
The chapter describes how to do System Configuration. If you don’t know how to enter configuration
screen, chapter 4 describes how to do it.
5.1 Prepare for using static IP
If your network environment is without DHCP function, then you need to use static IP for WAN port.
Then, the 9000MESH network administrator may need the following information:
y
IP address -a list of IP addresses available on the organization's LAN there are available to be
used for assignment to the AP(s)
y
Subnet
mask
y
DNS IP address
5.2 System Configuration – General
Click the entry on the left hand navigation panel for enter System Configuration -General. This directs
you to the System Configuration – General page.
This screen lists the software version number for your WH-9000MESH and allows you to set the Host
Name and Domain Name as well as establish system date and time.
y
Description: You can enter a description of the physical location of the unit in it. This is useful when
deploying units to remote locations to understand where the unit is.
y
Host and Domain Name: Both set at the factory for “default” but can optionally be assigned a unique
name for each.
AirLive WH-9000-MESH User’s Manual
20
