3. Configuring the Traveler 3G
13
AirLive Traveler 3G User’s Manual
To prepare your PC for management with the Traveler 3G, please do the following:
1.
Connect your 3G/3.5G USB modem to the USB port located on the top side of the
router.
2.
Connect your computer to the Ethernet port on the right side of the router for configuring
the router.
It is recommended to configure the router through the Ethernet
port for the first time setup.
3.
Switch on the button of “ON/OFF” to turn on the router
4.
Please check all LEDs on the front side. “PWR/CHR” LED should be steadily on in
green color, and “ETHERNET” LED should be on.
5.
If PWD LED is not on, or any LED you expected is not on, please recheck the cabling, or
jump to “Chapter 9 Troubleshooting” for possible reasons and solution.
You are ready now to configure the Traveler 3G using your PC.
