Connecting to Power
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a power voltage of 7.5Vdc/1.5Amp
to the receptacle on the rear panel of the converter, and then attach the plug into a
standard AC outlet with a voltage range from 100 to 260 Vac.
Sliding Switch
There is a sliding switch for duplex mode setting for fiber port. Refer to the table below for
more details.
Switch 1 : On -> Fiber Half Duplex
Off -> Fiber Full Duplex
1
ON
On
Half
Duplex
Off
Full
Duplex
(default)
Installing in a Chassis (OV-MCR116)
The Converter can be fit into any of the expansion slots on a special designed chassis.
Unscrew and pull out the media converter board
y
First, install the converter onto a carrier supplied with the chassis:
Step 1- Unscrew the carrier from the desired expansion slot on the chassis.
Step 2- Remove the screw on the converter as shown below.
Step 3- Fit the converter onto the carrier and use the screw to secure it.
2
AirLive OV-100 User’s Manual
