Quick Setup Guide
Installation Step:
English
EN
Installation Steps
Figure A
LED DEFINITIONS
Power
1000M (1~26)
Link/Act (1~26)
Red ON
Red OFF
Green ON
Green ON
Green OFF
Green Blinking
Power is on and normal.
The switch is not receiving power.
1000M Link Connecting.
Link connected.
Link disconnect.
Data transmisson.
Mode Switch Control
VLAN
Default
Extend
Port isolation mode. In this mode ports 1~24 cannot communicate with each other and can only communicate
with the Up-Link port 25/26.
Normal mode. All ports can communicate with each other.
Extension mode. Data transmission distance can be extended to 250 meter at a transmission rate of 10Mbps
Port 17~24 only. 17~24 Ports support 100M Speed reducation negotiation, 250 meters in 10Mbps mode,
Port 1~16 and Port 25/26 at 1000Mbps.
1. Remove the switch and accessories from the package.
2. Connect power to the switch. Make sure that “Power” LED is on.
3. Check the Port LED indicator status. When a device is
connected the port light up.
5.
For more product information visit www.airlive.com.
26-Port VLAN SOHO Gigabit Switch
Live-26G
Green OFF
10/100M Link Connecting or Disconnect.
26 Port VLAN Soho Gigabit Switch
Live-26G
4. QoS Data Priority is supported by Port 1~8
.