AirLive AirMax5N/ESD User Manual Download Page 32

Page: 32 / 96

4. Web Management-Wireless and WAN Settings

AirLive AirMax5N User’s Manual

Mode:

The available wireless operation modes for AirMax5N. Select one and click

on “Change Mode” button to switch between modes.

Setup:

Click here to configure the Wireless and WAN (in router mode) settings.

Radio

: This explain how the radio function in the particular operation mode

Ethernet

: This shows whether the radio

Once you click on the “Setup” page, the wireless settings will appear.

4.2.1 Regulatory Domain

Operation Mode -> Setup -> Regulatory Domain

The legal frequency and channels in 5GHz spectrum varies between countries. Please
select your country from here. There is a special domain called “

Test Domain

” which will

show all supported channels. It is for compatibility testing only. Please make sure the
channel you used is allowed in your country when select this special domain.

Summary of Contents for AirMax5N/ESD

































































































Search results

Summary of Contents for AirMax5N/ESD

Reviews:

Related manuals for AirMax5N/ESD

Brands by name

Popular brands

AirLive AirMax5N/ESD, User Manual

Search results

Summary of Contents for AirMax5N/ESD

Reviews:

Related manuals for AirMax5N/ESD

Brands by name

Popular brands