manualshive.com logo in svg

AirLive AirLive PoE-100HD-ICR, User Manual

Share
Download
AirLive AirLive PoE-100HD-ICR User Manual Download Page 29

5. Administrating the Device 

 

                                                 

AirLive POE-100HD

 

/POE-100HD-ICR User’s Manual

 

25

 

 

PPPoE: 

To enable or disable the PPPoE service here.

 

 

User name: 

 

Type the user name for the PPPoE service which is provided by the ISP.   

Password: 

 

Type the password for the PPPoE service which is provided by the ISP. 

 

 

IP address, Subnet mask, and Gateway (read only): 

Shows the IP information got from PPPoE server site. 

 

Status:

   

Shows the Status of PPPoE connection. 

 

Streaming 

RTSP is a streaming control protocol, and a starting point for negotiating transports such as 

RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a 

"remote control" for controlling the media stream delivered by a media server. RTSP 

servers typically use RTP as the protocol for the actual transport of audio/video data.

 

Summary of Contents for AirLive PoE-100HD-ICR


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands