manualshive.com logo in svg

AirLive AIRCAM POE-250HD, User Manual

Share
Download
AirLive AIRCAM POE-250HD User Manual Download Page 11

2. Package Contents 

 

 

A

irLive AirCam POE-250HD User’s Manual

 

 

7

2.2 

Mounting the Camera 

Ceiling Mount 

 

Fix the camera to ceiling with the three supplied screws. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Install the Camera in LAN 
 

1. Plug an Ethernet cable into the Camera 

 

Connect an Ethernet cable to the LAN socket and attach it into the network.   

 

2. Connect the external power supply to Camera 

Connect the attached power adapter to the DC power jack of the camera.

 Note

: Use the power 

adapter, 12VDC, included in the package

 

and connect it to wall outlet for AC power.   

Once you have installed the camera well and powered it on, the power LED (orange) will turn on later. The 
power LED turned on, it means the system is booting up successfully. Furthermore, if you have a proper 
network connection, and access to the camera, the LAN LED (green) will flash.

Summary of Contents for AIRCAM POE-250HD


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands