manualshive.com logo in svg

AirLive AIRCAM POE-200HD, User Manual

Share
Download
AirLive AIRCAM POE-200HD User Manual Download Page 7

2. Package Contents 

 

 

A

irLive AirCam POE-200HD User’s Manual

 

 

3

 

 
 
 
 
 
 

 

User can find the following items in the package as below: 

 

Item 

Descriptions 

 

1. Dome Network Camera 

is 

the main element of the 
product.

 

 

2. Screws

 and anchors x 3 

pairs  

 

3. Power Adapter 

dedicates 

12V DC electric power output to 
Network Camera. 

 

4. User’s Manual CD

 provides 

installation software, 
application program, important 
information and instructions for 
operating the Network Camera. 

                   

   

 

5. Quick Start Guide

 provides 

important information and 
instructions for installing this 
device.

 

 
 

If any of the above items are missing, please contact your dealer immediately.   
 

Note: Using a power supply with a different voltage than the one included with the Network 
Camera will cause damage and void the warranty for this product.   

 
 
 
 
 
 
 

2 

2. 

Package Contents 

Summary of Contents for AIRCAM POE-200HD


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands