5
8. Click
Finish
to complete the driver installation.
9. Leave your computer powered on and proceed to the next section,
Hardware Installation
.
1.4 Hardware Installation
After you have updated the USB 2.0 host controller driver to the latest version, you can
install the TV box. Please refer to the diagram below as you follow the installation
procedures.
Note
: Be sure to follow the steps carefully and
plug in the USB 2.0 connector last
.
1. Connect the coaxial cable for the TV antenna/cable to the
TV
port of the TV box.
2. Connect the S-Video cable from you video source to the
S-Video
port of the TV box. If
you don’t have an S-Video cable, use the provided
Composite to S-Video converter
cable
.
3. Connect the audio cable from your audio source to the
AUD-IN
port of the TV box.
4. Connect one end of the provided Audio Cable to the
AUD-OUT
port of the TV box and