manualshive.com logo in svg

Airlink101 AWLL6077V2, User Manual

Share
Download
Airlink101 AWLL6077V2 User Manual Download Page 34

33 

You can also choose between no security or WEP security. If you choose WEP security, 
you can follow the instructions in the 

Configuring Encryption 

section of the manual. 

 

Click 

OK 

to save the profile. 

 

 

 

 

  Select your new profile from the Available Profile(s) box, and double click to enable it. 

You need to configure all other computers that you are planning on connecting to your  
ad-hoc network with the same settings that you input on this screen. Every computer 
has to be set up exactly the same.  If any of the settings are different, the network 
will not function. 
 

Note: 

If you are having trouble connecting, slow connection, or connection is unstable, 

you will want to try changing channels. Start with channel 1 and work your way up until 
you find a channel that gives you the best connection. Each time you change the channel, 
save the settings then reboot the computer. Also, make sure that you do this on every 
ad-hoc machine so that they will all be set to the same channel.

 

Summary of Contents for AWLL6077V2
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands