16
6.2.2 Wireless Security
You can configure wireless security such as WEP or WPA encryption on this screen.
Note
: It is recommended that you use WPA-PSK encryption over WEP if your wireless
clients support WPA-PSK. All of the wireless clients must use the same security settings
in order to connect to the router.
WEP
To enable WEP, select
WEP
from the
Security Mode
.
Encryption
: Choose from
64 bits
or
128 bits
Passphrase
: You can enter a passphrase and click on the
Generate
button and the
router will automatically generate four WEP keys for you.
WEP Key 1 – 4
: Manually assign a passphrase for each key. If you selected
64 bits
encryption, enter
10
HEX characters (0-F) for each key. If you selected
128 bits
encryption, enter
26
HEX characters (0-F) for each key.
TX Key
: Select a key to be the active key.
Click
Apply
to save the setting.
