119
802.1d Spanning Tree
The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface. The
Spanning Tree Protocol, which is also referred to as STP, is defined in the IEEE Standard 802.1d.
DHCP Setup :
Devices connected to the system can obtain an IP address automatically when this service is enabled.
Î
DHCP :
Check
Enable
button to activate this function or
Disable
to deactivate this service.
Î
Start IP / End IP:
Specify the range of IP addresses to be used by the DHCP server when assigning IP address to
clients. The default range IP address is 192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
Î
DNS1 IP :
Enter IP address of the first DNS server; this field is required.
Î
DNS2 IP :
Enter IP address of the second DNS server; this is optional.
Î
WINS IP :
Enter IP address of the Windows Internet Name Service (WINS) server; this is optional.
Î
Domain :
Enter the domain name for this network.
Î
Lease Time :
The IP addresses given out by the DHCP server will only be valid for the duration specified by the
lease time. Increasing the time ensure client operation without interruptions, but could introduce potential conflicts.
Lowering the lease time will avoid potential address conflicts, but might cause more interruptions to the client while it
will acquire new IP addresses from the DHCP server. Default is
86400
seconds
Click
Save
button to save your changes. Click
Reboot
button to activate your changes
