Section 1
Connecting the Access Point
Step 1
Connect one end of a network cable to the
Ethernet
port of the access point and connect the
other end of the cable to the
LAN
port of a router or switch.
Step 2
Power on the access point by connecting one end of the supplied power adapter to the power
jack of the access point and connecting the other end to an electrical outlet.
Step 3
Make sure the
Power
and
LAN
lights on the Access point are lit, and the
WLAN
light is blinking.
If not, verify the cables are functional and try the above steps again.
This Quick Installation Guide only provides the basic instructions. For more
detailed information, please refer to the user’s manual on the supplied CD.
