12
Step 4.9
Confirm your settings at this page. If everything is correct, click
Apply
to save the settings, then the camera will restart in 50 seconds.
Step 4.10
After the camera is restarted, unplug the network cable from it. It
will take around 1 or 2 minutes for the camera connecting to your wireless
router/AP.
To make sure the wireless connection is successfully established, open the
SkyIPCam Utility
and click on
Search
. If the camera shows up in the list, it
is connected to your wireless network successfully. If not, please verify the
SSID and the wireless security settings you configured at
Step 4.8
are
correct.