22
FIGURE 12
Part No. 331-340 (2600 Hi)
Part No. 331-008 (2600 Lo)
Part No. 331-007 (2500)
Part No. 331-009 (2400)
FIGURE 12 PARTS LIST
ITEM NO. PART NO. DESCRIPTION
Cover Ass'y
(2400,2500,2600 Lo)
Cover Ass'y
(2600 Hi)
Bearing
Crosshead Assembly
Gear Crank
(2500)
Gear Crank
(2400)
Gear Crank
(2600)
Bearing
Box*
Bolt Soc Hd (2)
Shoulder Bolt (2)
Retaining Ring
1
2
3
4
5
6
7
8
331-041
331-341
331-046
331-038
331-039
331-039A
331-039B
331-047
331-040
100-381
100-380
331-088
Pin
Retaining Spring
Paint Pump Assembly-Lo-Boy
Paint Pump Assembly-Hi-Boy
Screw (2)
Tube Spacer (2)
Cover - guard
Sleeve Bearing
Gasket
331-065
331-062
331-209
331-236
100-318
331-074
331-111
331-061
331-219
9
10
12
13
14
15
16
17
18
SERVICING GEAR BOX
ASSEMBLY
1. Remove fluid pump as per "Fluid Pump Disconnect"
procedures page 21.
2. On 2400 & 2500 remove handle (Fig. 17, Item 2)
by removing two screws (Fig. 17, Item 3). On the
2600, detach frame by removing the four screws (Fig. 18,
Item 7)
3. Refer to Fig. 12. Separate the cover assembly (1) from
box (6) by removing bolts (7) from front of cover and back
of box and shoulder bolts (8) from front of cover and back
of box.
4. Lay unit on its back and disassemble gearbox.
5. Inspect bearings (2) and (5), Crosshead Assembly (3),
Gearcrank (4) and sleeve bearing (17) inside cover
assembly for wear or damage. Replace worn or damaged
parts.
6. If gear grease needs replacing, replace with gear
grease (Part No. 331-132)
7. Clean mating surfaces of cover and box thoroughly and
attach self stick gasket (18).
8. Reassemble in reverse order.
2 3
5
4
8
9
10
6
12
13
14
16
8 7
17
15
18
WARNING -
Do not operate
machine without cover guard in place.
1
* Note Box (Item 6) can be ordered separately, but is
included with Motor Ass'y (PN 331-070, 331-068)
7
GEAR AND PUMP ASSEMBLY
