Setup
8
3A4408B
Gun Trigger Lock
Connect Gun to Sprayer
Make sure sprayer is turned off and
unplugged from power source. Refer to your
sprayer instruction manual for priming and
spray instructions.
1.
Attach supply hose to sprayer fluid
outlet.
2.
Attach other end of supply hose to gun
inlet. Use two wrenches to tighten all
connections securely.
3.
Refer to sprayer instruction manual for
priming instructions.
Installing Tip and Tip Guard on Gun
To prevent spray tip leaks, make certain
spray tip and guard are installed properly.
1.
Perform
Pressure Relief Procedure
,
page 7.
2.
Engage trigger lock.
To prevent injury when the gun is not in
use, always engage the gun's trigger lock if
unit is being shut down or left unattended.
ti30178a
To avoid serious injury from skin injection,
do not place your hand in front of the spray
tip when installing or removing the spray
tip.
