Setup
Setup
1
Connect appropriate Graco
high-pressure hose to
sprayer. Tighten securely.
2
Connect other end of hose
to gun.
3
Tighten securely.
4
Remove tip guard.
Setup
5
Install clean inlet strainer.
Fill throat packing nut with
TSL to extend pump life. Do
this each time you spray
and store.
6
Check engine oil level.
Add SAE 10W-30
(summer) or 5W-30
(winter), if necessary.
See Honda Engines
Owner’s Manual.
7
Fill fuel tank.
8
Attach sprayer grounding
clamp to earth ground.
Approximate
Fill Level
(cold)
Startup
1
Place suction tube and drain
tube in grounded metal pail
partially filled with flushing
fluid. Attach ground wire to
pail and to earth ground.
2
Turn prime valve down. Turn
pressure control counter-
clockwise to lowest
pressure.
3
Set pump switch OFF.
PAINT
FLUSH
/&&
