VELOCITY PROFILE
+61 (2) 6608 2736
|
|
www.airius.com.au
3
AP-60/EC-230V
Product Information & Installation Guide
AIR PEAR SERIES - Model 60/EC
PREPARATION
Install electrical circuit(s) and outlet(s) in accordance with national
and local electric codes.
Outlets should generally be mounted vertically unless a “twist/
locking” type is being used.
Wall switch may be installed in circuit to disable power and prevent
electrical hazards when servicing.
Confirm electrical continuity of Airius unit on the ground before
permanently mounting in the ceiling.
OPERATION
Designed to operate 24 hours-a-day, 7 days-a-week to maintain air
circulation/thermal equalization/humidity equalization.
Use optional speed control to fine tune RPM if needed.
MAINTENANCE
Frequency of cleaning will vary by application and environment.
You may clean the plastic housing with a damp warm cloth, using
mild household detergents.
Do not use petroleum products, thinners or solvents to clean any
part of the Airius unit.
If the Airius unit fails, contact manufacturer.
MATERIALS & PROPERTIES
Constructed from recyclable materials.
The outer shell, stator and fan blades are fire rated 5VA materials.
Power cord is a 1.8m, 3 wire, 1.02 mm diameter 300VAC rated
electrical cord - CE/EU compliance rated as HO5VV (PLUG NOT
SUPPLIED).
Electrically commutated, variable speed 92% efficient motor.
Motor is thermally protected. Shutoff is at 110°C & reset is at
90°C.
No lubrication required. Bearings are sealed.
UNIT PLACEMENT
INSTALLATION
Do not hard connect fans in excess of 10 kgs unless agreed with
Airius prior to Installation. When attaching it is preferred if some
chain or cable is used between fan and the support. However it is
not imperative.
For Cooling the Airius fan should be located to suit client’s require-
ments. Suggested locations are from just under the ceiling or closer
to the floor to ensure suitable air-cooling flow.
For Heating or Conditioned Spaces the Airius fan should be
securely installed as close as possible to the ceiling.
For combination applications fans can be installed close to ceiling
or lowered slightly. Contact Airius for design details and assistance.
The Airius unit performs best when air column from the nozzle is
unimpeded to the floor.
The Airius unit should not be mounted directly in front of heat
ducts, vents or any other high heat source.
Use professionally installed hardware, capable of supporting a
minimum of five times the weight of the fan unit.
Hardware to hang the unit includes but is not restricted to: Hooks,
chains, cables, carabiners, bridle rings, beam clamps and bolts.
Density of the placement is directly related to the effectiveness,
performance and savings.
Mount out of reach from people and animals.
Floor plans, mezzanines, office locations, machinery, people
placement, plumbing, lighting, duct work, electrical systems, natural
light/air systems, cranes, doors, windows, ventilation and fire
suppression systems are all factors in properly locating the Airius
system within the ceiling.
> 2.09 m/s
> 1.47 m/s
> 1.13 m/s
> 1.02 m/s
> 0.88 m/s
> 3.13 m/s
0
3 m
3 m
12 m
15 m
21 m
18 m
9 m
6 m
3 m