AIRIS Praxis N1204 User Manual Download Page 102

Page: 102 / 268

BIOS Utilities

5 - 8 Advanced Menu

Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)

You can adjust the Bluetooth module power setting to your preference. The default
setting (

Disabled

) will see the Bluetooth module powered off when the system is

started up or restarted. Enabling the power setting will have the module retain the
last power status (on or off) before any restart or shut down.

Total Graphics Memory (Advanced Menu > Advanced Chipset Control)

Use this menu item to set the amount of system memory to be allocated for use by
the internal graphics device. The memory size may be adjusted to

128MB

256MB

MAX

(the maximum memory available to the system) if required.

Intel Smart Connect Technology (Advanced Menu)

Smart Connect

is a technology that makes checks on web applications that are

open, when the computer is in

Sleep

mode, and thus allows updates to be made with-

out the need to turn the computer on. The sub-menus here allow you to enable/dis-
able the technology itself (

ISCT Configuration

), configure notification control

(

ISCT Notification Control

) and to enable disable power control across the wireless

local area network (

ISCT WLAN Power Control

) or wireless wide area network (

IS-

CT WWAN Power Control

). See

“Intel® Smart Connect Technology” on page 7 -

Summary of Contents for Praxis N1204













































































































































































































































































Search results

Summary of Contents for Praxis N1204

Reviews:

Brands by name

Popular brands

AIRIS Praxis N1204, User Manual

Search results

Summary of Contents for Praxis N1204

Reviews:

Brands by name

Popular brands