manualshive.com logo in svg

AIRIS N765, User Manual

Share
Download
AIRIS N765 User Manual Download Page 20

 

Try to place the LCD panel or external monitor so that there is little glare from 
the sun on the monitor. 

• 

• 
• 
• 

Walk around the room every hour. 
Every half hour look away from the computer screen for a few minutes. 
Place everything that you need to work within easy reach. 

Welcome to the Notebook PC 

Congratulations on your purchase of the Notebook PC.  Your Notebook features the 
latest advances in portable computing technology.  The Notebook’s modular design 
provides maximum expandability without compromising portability.  

The high-performance CPU and enhanced IDE hard drive provides you with extra 
processing power for handling complex graphics and running large programs.   

One PCMCIA slot gives you the ability to use standard PCMCIA cards, such as a 
LAN adapter or memory cards.   

Getting to Know Your Computer 

Opening the LCD Panel 

At the front of the Notebook you will find a retaining latch on the display panel that 
locks the display in closed position when the Notebook is not in use. 

18 

Summary of Contents for N765









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands