SPDIF Setup Page:
SPDIF output RAW SPDIF OFF
SPDIF/RAW
SPDIF/PCM
Dynamic
LPCM out 48k
48k
96k
Sound Effect Page
EQ Type None None
Rock
Pop
Live
Dance
Techno
Classic
Soft
Bass Boost OFF
ON
OFF
Super Bass OFF
ON
OFF
Treble Boost OFF
ON
OFF
E3
SYSTEM SETUP
- -
- -
- -
- -
FULL
OFF
3/4
1/2
1/4
- -
SPDIF output:
(SPDIF/RAW): when the unit and the amplifier are
connected by coaxial and optical cables, please select
this item; when it playbacks disc of Dolby digital, DTS
and MPEG, the coaxial or optical output will output
the corresponding digital signal, in this case, the
connected amplifier should have the function of
decoding Dolby digital, DTS and MPEG.
(SPDIF/PCM): when the unit is connected with 2
channel digital stereo amplifier, please select this item;
when it playbacks disc of Dolby digital, MPEG, the
coaxial or optical output will output in 2 channel mode
modulated by PCM.
Dynamic:
If watching large dynamic scope movie program at
night, select this mode to reduce the volume, meantime
keep the little minutia EQ high level, thus it can avoid
troubling neighbors without detracting volume quality.
LPCM out:
Setup different mode among 48KHz and 96KHz
according to different audio signal source.
Note: some amplifiers cannot support 96KHz signal,
and may lead to abnormal sound from the speaker.
EQ Type:
Seven modes are available. Select “live” to get live
music effect. When EQ type is off, the sound of the
disc will output directly. You can setup the other items
to reach your requirement.
Bass Boost, Super Bass, Treble Boost Setup bass
boost, super bass and treble boost to assort with EQ
type to reach a perfect status.
Summary of Contents for LW 108T
Page 1: ...ENGLISH INSTRUCTION MANUAL LW 108T ...
Page 32: ...DVB INTRODUCTION ...
