User manual
–
HEPA
Bulle
–
ED02_09-August-2021
5 /31
1.2
REGULATORY STANDARD
HEPA
Bulle
devices are CE-marked and comply with European regulations:
European Low Voltage Directive (LVD) 2014/35/EU
European Electromagnetic Compatibility Directive (EMC) 2014/30/EU
1.3
NORMATIVE STANDARDS
•
NF EN 61010-1 (2011+A1: 2019). Safety requirements for electrical equipment for
measurement, control and laboratory use. Part 1: General requirements.
•
EN 61326-1 (2013). Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 1: General requirements
•
- NF S 90351 (2013). Healthcare establishments - Clean rooms and associated controlled
environments. Requirements relating to the control of airborne contamination.
1.4
CLASSIFICATION
Type of protection against electric shocks
Class I
Earthing for all accessible metallic elements and internal metallic elements.
Level of protection of applied parts against
electric shocks
No applied parts
Degree of protection against water and solids
IP 40
Operating mode
Continuous service
Operation under normal conditions of an unlimited duration without
exceeding operating temperature limits.
Electromagnetic interference
EN 61326-1 class B standard for conducted and radiated
disturbances.
HEPA
Bulle
is suitable for operation in an environment consisting of
devices which respect equivalent criteria.