ENGINES
Cut out the objects in
ENGINE COWLING
(or
“EC”
) section and
ENGINE INTERIOR
(or
“EI”
)
section (including
Turbine
and
Exhaust
) objects.
Then, make inverse folds along the
(B)
and
(C)
lines.
Once completed, set
the objects aside until
they are needed later.
For each
Engine
Interior
object, make
folds along the
(A)
line.
For each
Exhaust
object, curve high-
lighted
(D)
section so
that the
(E)
and
(F)
tabs touch back-to-
back.
Apply glue to the non
-printed side of the
(E)
and
(F)
tabs, and
press them together
to adhere.
The
(E)
and
(F)
tabs
joined together
become one single
tab
(G)
. Set the
objects aside until
they are needed
later.
Engine Interior
Exhaust
Slot
Exhaust
section into
Interior
section such that
Exhaust
section
covers the highlighted section
(K)
and
the
(G)
tab is ‘sandwiched’ between
(H)
and
(J)
.
Assemble
Interior
from Step 2 and
Exhaust
from Step 3.
Apply glue to the non
-printed side of the
Interior
(H)
and
(J)
section. Do not
adhere sides yet.
Then, quickly press
and adhere the
(H)
and
(J)
sections
together, so they
create a ’sandwich’
with the
(G)
tab in
the middle. Set
objects aside.
3
Paper-based scale model design system Copyright © 2001-2019
—
James Messner / Papier Avion and Airigami
6
