Maintenance
To check...
Weekly
Monthly
Periodically
General
•
Wheelchair rolls straight
(no excess drag or pull to one side)
Frame and crossbraces
•
Inspect for loose or missing hardware
•
Inspect for bent frame or cross braces
Seat and back
•
Inspect for rips or sagging
•
Inspect for loose or broken hardware
•
Inspect cane hand grips for
wear/looseness/deterioration
Rear wheels
•
No excessive side movement when
lifted and spun
Hand rims
•
Inspect for signs of rough edges or peeling
Spokes
•
Inspect for broken spokes
Tires
•
Inspect for cracks or wear
•
If pneumatic, check for proper inflation
CAUTION: As with any vehicle, the wheels and
tires should be checked periodically for cracks
and wear, and should be replaced.
Front casters / forks
•
Inspect axle assembly for proper tension
by spinning caster, caster should come
to a gradual stop
•
Check hardware for tightness
•
Wheel bearings are clean and free of moisture
Wheel locks
•
Do not interfere with tires when rolling
•
Pivot points free of wear and looseness
•
Wheel locks easy to engage
•
Wheel locks prevent wheelchair from moving
when engaged
16
17
NOTE – Every six months, take your wheelchair to a qualified dealer for a
thorough inspection and servicing. Regular maintenance will reveal loose
or worn parts and enhance the smooth operation of your wheelchair.
To operate properly and safely, your wheelchair must be cared for just
like any other vehicle. Routine care will extend the life and efficiency of
your wheelchair.
Initial adjustments should be made to suit personal body structure
and preference.
Cleaning & Disinfecting
To disinfect and clean your new Airgo wheelchair, particularly when
multipatient use is planned, use an antibacterial hard surface disinfectant
that is non-corrosive. We recommend an environmentally friendly cleaner
like PureGreen24 since its naturally occurring active ingredients, silver
ions and citric acid, are strong enough to kill bacteria including MRSA.
It is also EPA registered for use on children’s toys in your home. Visit
www.puregreen24.com for more information. Alternatively, most methanol
based disinfectants are effective.
In general, you’ll be required to spray on your desired disinfectant and let it
sit for at least 30 seconds (depending on the organism desired eliminated)
before wiping clean with a soft cloth or towel. Please take caution to read all
instructions before using your desired disinfectant as individual directions
may vary.