Airgineers Manual version 1.0 2022
5
Building the drone
STEP 1
Attaching the propellers
4
M4 (CW)
Red and
Blue wire
M3 (CCW)
Black and
White wire
M2 (CCW)
Black and
White wire
M1 (CW)
Red and
Blue wire
Add the propellers by gently pushing them down onto the motor spindles.
IMPORTANT: Make sure that orientation of the propellers on the motors
is correct as shown in the image above. When fitted, the curved part of
the blade faces in the direction of rotation for each motor, as shown in
the image on the right.
Double check that the propeller blades are correctly attached.
The curved part of the blades should be facing the direction of rotation
(as shown above).