AIRFORCE Aspira Induction slim g5 Motion, Instruction On Mounting And Use Manual

Page: 48 / 55

FUNZIONAMENTO I
119
OPERATION GB
119
Aspira is equipped with touch sensitive electronic sensor keys.
Press the power button
If no other control is enabled, the hob turns off automatically for safety reasons.
Every cooking zone is equipped with its own dedicated slider. The
hob automatically detects which cooking zone to activate, based
on the position of the pot.
When you place the pot on the desired zone, the dedicated control
is immediately enabled.
On display appears 0; operate the slider to select the desired power
level that ranges from 1 to P
P: indicates the Booster function and is present on every cooking
zone. To activate it, operate the slider to enable power P. Such function remains active for 10
minutes, after which the system switches to power 9.
Note: if the cooking zone has already reached the maximum temperature, the booster function
cannot be enabled; the value P flashes for 1 to three seconds and the function will be disabled
automatically.
We recommend you use this function to boil water faster.
Note: the booster function can be enabled on all cooking zones up to maximum two at a time.
Touch the power button.
The main indicator light and cooking zone lights will switch off. The cooktop is now powered
off. The residual heat indicator, displayed as a H on each cooking zone, will remain lit until these
zones have not sufficiently cooled down.
Warning: risk of burns
Do not touch a cooking zone for which the indication (H) appears.
If a cooking zone remains lit for too long at the same power level, the appliance will
automatically switch it off, and the residual heat indicator H will appear. Switch it back on to reset
the cooking zone’s operation.
The table below lists the maximum uninterrupted operating time for each power level:
Switching on the cooktop
Activating the desired cooking zones
Switching off the cooktop and residual heat indication