CLEANING THE APPLIANCE
A.
Cleaning the dust cup
1.
Remove the dust cup from body.
2.
Press the dust cup bottom release button
to release the dirt inside (dust will fall
down automatically,
fig. A)
3.
If the filter system is too dirty, press the
dust cup cover release button, take out the
filter assembly out of the dust cup, then
clean them with a soft brush or wash them
with water. Dry them completely before
you use again. (fig. B).
fig.A
fig.B
B. Cleaning the HEPA filter / sponge
1. Remove the dust cup from body.
2. Rotate the dust cup cover counter-clockwise
and take out the dust cup cover. Draw out the
sponge and HEPA filter set.
(fig. A)
3. Pull up the knob of the filter frame and pull
out the sponge filter and HEPA filter from the
case box. Clean the Sponge and HEPA filter
with a soft brush or rinse it in lukewarm water.
Dry them completely before use. (All the
filters are washable. We recommend you to
clean the filters when the suction power is
becoming weak, fig. B)
Note: Filters should be positioned back
properly for the vacuum to work efficiently.
fig.A
fig.B
Plastic Centering
Filter System
Filter Assembly
Dust Cup Bottom
Release Button
Push
