Cleaning and Maintenance
1. Turn off the switch
“
o” for
OFF
“-”
for
ON
2
.
3.
Take off the hose and floor
brush
4
.
Pull out
the head as
shown in
the
picture
6
.
Clean the tank and dry
with a soft cloth
5
.
Pull out
the filter, wash and
dry it for next use
Protective Device
Special instruction
s
for
the protective device
When
the
tank is full of water, th
is Protective
D
evice will
rise up
.
S
uction power will stop
but an
abnormal noise
may
indicate that the motor is running at a high speed. If this
happe
ns
, cut off the power
immediately
and pour
out
the
water
from the tank
.
When vacuum cleaner overturn
s
or shak
es excessively
, the
Protective D
evice
may not work correctly.
What you should do
is to switch
off the
machine
and
turn
it upright
before
continuing to use the vacuum.
When
the
tank is full of water, the
Protective Device
will rise up, suction power will cut off
. Pour out all
the water from the tank before resuming operation.
Raising of
water level
Operation
T
o avoid damages
or injuries
, do
not move vacuum when the clips
are unlocked.
Use wire and plug
correctly
Pull out the plug when
not in use
This is t
o avoid
possible
electric shock or fire, etc.
Avoid incorrect operation
Do not put metal into the connector
of this machine (To avoid electric shock)
Do not pull the plug by the wire
Do not pull or move the machine by
pulling the hose
Please use the handle to move or
pull it
K
eep
the vacuum at
a
safe
distance from fire/heat source or sunlight
To prolong
your vacuum's life
Do
not collect the following
as it may
cause vacuum's breakdown:
C
onstruction
rubbish
/
powder
Ash or any flammable material
Glass/tins/needles/toothpicks
R
opes/stockings
or the like
Do
not use the hose or the
rod
to collect dust
directly to avoid wear
Always u
se the floor brush or crevice nozzle etc.
to
pick up dirt / water
Do
not block the air-outlet
If
the suction mouth is blocked
, unblock it first
before using the vacuum
U
se the hose carefully
to avoid
damage
To avoid the motor overheating
,
do
not use it contin
uous
ly
for
more
than half an hour
. Also, it's time to
service the vacuum when:
T
he tank is full of dust
/ dirt
T
he suction mouth is blocked
T
he hose,
rod or
nozzle is blocked
Please check whether the cloth or HEPA filter
i
s
installed before
operating
Pull out the plug and put
the wire in order
IMPORTANT REMINDERS
