6
• When finished using the unit, wind the power cord around the cord winding hooks for easy
storage.
Using the Unit as a Hand Vacuum
• Disconnect the extension tube from the hand vac by releasing the handle port from the locking clip
and removing the extension tube from the hand vac handle. Once the extension tube is removed,
snap the handle port shut.
Note:
You may choose to leave the crevice tool or floor brush attached to the hand vac when
operating as such.
• Press the
“1”
position on the On/Off power switch to turn the unit on. When finished using the unit,
press the “
0
” position on the On/Off power switch to turn the unit off.
Cleaning & Changing the Dust Cup Filter
Changing and Cleaning the Dust Cup Filter
In order to achieve the best performance, empty the dust cup container and clean the dust
cup filter after each use.
1. To remove the dust cup container, press down on the dust cup container release button (Fig. 8)
and separate the dust cup container from the main unit. (Fig. 9)
Fig. 9
Fig. 8
2. Pull out the dust cup filter. (Fig. 10)
Fig. 10
3. Empty the dust from the dust cup container.
4. Rinse the dust cup filter in cold water, and then let it air dry for
24 hours
before replacing it back in
the dust cup container.
Important Note:
DO NOT use a washing machine to clean the dust cup filter. Do not use a hair
dryer to dry it. AIR DRY ONLY.
5. Replace the dust cup filter carefully into the dust cup compartment.
NEVER operate the stick vac
without the dust cup filter in place.
Press down on the
dust cup container
release button
Dust cup
container
Dust cup
filter
Separate the dust cup container
from the main body.
