www.Airflex5D.com
|
Projector Assembly
1. Take the assembled Projector base plate mount(below) and install on the projector’s mounting holes
screw using adequate screws on all locations as shown in the sample illustration below.
Metal clip
Polarized Filter (not included)
3
．
After the projector has been attached and properly secured to the
projector base plate
, hook it to
the arm assembly and adjust as needed.
Hang the hook 45 °downward
Washer should be outside when inserted
Note
: The projector you are installing may differ
in appearance from the sample illustration.
Note
: The illustration is for reference only. The
illustration indicates how the projector will
look like after the projector mount is hooked
on to the suspension arm assembly. See the
next steps for more details.
