NOTE: Before installing blade
holders to the motor, please
remove the plastic inserts
.
PAGE: 3 / 4
Secure blade holders to the motor with
motor screws and washers.
Assembly without fan light
Make sure the lead wire of fan light
in switch box is sealed with a wire
nut exactly. Secure the switch box
cover with the switch box screws.
Replace the fan housing inner
bulbs(FN56305)
Screw
Plastic Insert
Fig.13
Motor Screw
Blade Holder
Fig.15
Fig.14
Switch Box
Screw
070421
TM
Fig.18
Connect the two terminals respectively
from the motor and the switch box.
Open the inner light plate of worse bulbs
by screw driver.Take off the worse bulb
and install the new one.
Secure the inner light plate back
Switch Box
Screw
Fig.19
OFF
OFF
DIMMER
U/L
D/L
HI
HI
LOW
For FN56306
For FN56305
LOW
MED
MED
Fig.17
Fig.17
Install the battery to the transmitter (9V, not
included).
* Press "HI" to turn on the fan at high speed.
* Press "MED" button to turn the fan in
medium speed.
* Press "LOW" button to turn the fan in low speed.
* Press "OFF" button to turn off the fan.
* Press "LIGHT" button to turn on/off the fan
light, and press and hold the "LIGHT" button
to adjust the illumination of light.
Install the battery to the transmitter (9V, not included).
* Press "HI" to turn on the fan at high speed.
* Press "MED" button to turn the fan in medium speed.
* Press "LOW" button to turn the fan in low speed.
* Press "OFF" button to turn off the fan.
* Press "U/L" button to turn on/off the upper light, and press and
hold the "U/L" button to adjust the illumination of light.
* Press "D/L" button to turn on/off the fan light, and press and
hold the "D/L" button to adjust the illumination of light.
Fig.16
Turn ON the electric power at the
main fuse or circuit breaker box.
