Mounting Procedure
The Airelec Agate Heater is practical and discreet and is recommended for
bathrooms, kitchens etc
Specifications
Resistance with low thermal inertia • Control knob • Automatic thermal safety •
Steel casing • Polymerised polyester epoxy paint • Air outlet louvre in the unit •
Colour: white satin • Class II / IP 21 - 230V, 50Hz
• Weight 3 kgs • Dimensions
343mm (l) x 230mm (h) x 114mm (d)
•
Unhook and remove the backrest (Fig 2): unclip and unhook the legs
•
The backrest must be fixed to the wall using 3 screws (max diameter 5.5mm); ensure that the clips are at the
bottom). Note the safety distances shown in figures 3 and 4.
•
The appliance is double insulated and does not require an earth connection.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Installation
Connection
Before attaching the heater on the backrest,
select the wattage required (1000W or 2000W)
by turning the power switch on the back of the
heater. It is possible to change the power from
1000W to 2000W at any time by turning this
switch.
•
The Airelec Agate heater must be installed by a registered electrician.
•
All fixed wiring must be protected.
•
This Class II appliance does not require an earth connection. It must be positioned with the grid (or the
horizontal air outlet) directed downwards.
•
All pole disconnection must be provided in the fixed wiring for this appliance in accordance with AS/NZS
3000:2007.
•
The appliance should be mounted at a minimum height of 1.8m from the floor and 30cm from the ceiling. It
must also not be less than 250mm from any adjacent projecting surface.
•
When installing in a bathroom, the appliance must be installed so that switches and other controls cannot be
touched by a person in the bath or shower.
•
Avoid positioning the appliance behind curtains, doors to ensure that the airstream is not obstructed when in
use.
•
The appliance must not be located immediately below a socket outlet.
•
Caution : DO NOT COVER THE HEATER (To prevent overheating, do not cover the heater).
Dimensions in cm
186 cms
from the
floor
Dimensions in cm
(ceiling)
Agate Bathroom Heater
